- Windows Gui Programming
- Boot Windows 95 In Guide
- No Gui Boot
- Boot Windows 95 In Guitar
- How To Boot Windows 95
Press Windows+R keys to open the Run dialog, type msconfig, and click/tap on OK. Click/tap on the Boot tab, select the OS (ex: Windows 7) that you want to set this for at it's startup, and go to step 3 or 4 below. (see screenshot below) 3. To Enable GUI Boot for the Selected Windows. Aug 31, 2020 A test of the legacy of Windows 95’s desktop comes in how intuitive it still is for users of a 2020-era GUI OS. Windows 95 was by no means the first operating system to use a desktop based GUI. Windows 3.1 runs on top of MS-DOS. A boot disk for MS-DOS is what you need. You can go out to a DOS prompt and type format a:/s to make a bootable DOS disk. Jan 26, 2012 Windows 3.1 and/or Windows for Work 3.11 groups both installed through DOS. The way you got into Windows was to boot to a DOS prompt then type: CD Windows enter. Then your typed Windowsenter again to actually start Windows. I don't recommend you try that now though. EasyBoot runs on Windows 95/98/Me/NT/2000/XP. EasyBoot can: 1. Realize local language, multiple selections, and colorful menus. Create screen layouts, Insert text, menu bars and function keys with a full GUI 3. Preview the actual effects during the design process. Automatically generate boot loader and menu files.
The information in this article applies to: - Microsoft Windows 95
- Microsoft Windows 95 OEM Service Release 2
IMPORTANT: This article contains information about editing the registry. Before you edit the registry, you should first make a backup copy of the registry files (System.dat and User.dat). Both are hidden files in the Windows folder.
Starting Windows 95 in Safe mode can help you resolve issues that occur when you start Windows 95 normally. These issues include (but are not limited to):
- Setup hangs during the first reboot
- Error messages
- Hanging
- Loss of functionality
Starting Windows 95 in Safe mode bypasses the current real-mode configuration and loads a minimal protected-mode configuration, disabling Windows 95 device drivers and using the standard VGA display adapter.
If the issue does not occur in Safe mode, you may be experiencing a conflict with hardware settings, real-mode configuration issues, incompatibilities with legacy Windows programs or drivers, or registry damage.
For a description of the events that occur when you boot Windows 95 in Safe mode, see the following article in the Microsoft Knowledge Base:
PREPARING TO TROUBLESHOOT IN SAFE MODE
The procedures in the following sections describe steps to troubleshoot configurations in which Safe mode resolves an issue with Windows 95. Many of these troubleshooting steps require changes to system configuration files. These changes are not intended to be permanent; they should be used as techniques for isolating the conflict that resulted in an issue with the normal configuration.
The examples in this article assume that Windows 95 has been installed in the Windows folder on drive C. Adjust the syntax as required by your configuration.
Before you begin making changes, you should create an Emergency Boot Disk (EBD) if you do not already have one. You can use the EBD to restart the computer and edit the configuration files if any changes you make cause the computer to hang.
To create an Emergency Boot Disk, follow these steps:
- In Control Panel, double-click Add/Remove Programs.
- Click the Startup Disk tab, and then click Create Disk.
Once you have an EBD, shut down Windows 95, insert the EBD in drive A, and restart the computer. Make sure the computer can boot using the EBD. Restart the computer normally.
Troubleshooting the Windows 95 configuration files may require that the files be edited. You can use the MS-DOS text editor or System Configuration Editor to edit these files.
To use the MS-DOS text editor, type 'edit.com' (without quotation marks) at a command prompt, and then choose the Open command on the File menu to open the file you want.
To use System Configuration Editor, click the Start button, click Run, type 'sysedit' (without quotation marks) in the Open box, and then click OK. Click the file you want to edit on the Window menu.
TROUBLESHOOTING
The Safe-mode troubleshooting steps are broken into the following sections:
- Issues with the real-mode configuration
- Windows 95 command-line switches
- Windows configuration files and programs started automatically at startup
- Protected-mode device drivers
- Changing the video driver to the standard VGA display driver
- Registry damage
- If the problem persists
ISSUES WITH THE REAL-MODE CONFIGURATION
Windows 95 bypasses the Config.sys and Autoexec.bat files in Safe mode. A real-mode device driver or terminate-and-stay-resident program (TSR) loading in one of these files may conflict with Windows 95, leading to the issues you are experiencing during a normal boot. The following steps can help you determine if this is the case.
Test the Real-Mode Configuration
- Restart the computer. When you see the 'Starting Windows 95' message, press the F8 key, and then choose Command Prompt Only from the Startup NOTE: If the Windows 95 graphical user interface (GUI) loads, edit the Autoexec.bat file and remove or disable the 'win' line.
- Start Windows 95 with a minimal set of Windows drivers by typing the following line: NOTE: If networking components are required to start Windows 95, type the following line instead of the line above:
If the issue does not occur when you start Windows 95 in this manner, you have determined that the real-mode and protected-mode configuration conflict.
If the issue persists, the contents of the Config.sys or Autoexec.bat file may be at fault. You have determined that a conflict exists with the real-mode configuration, and you should perform a clean boot of the real- mode configuration.
Clean Real-Mode Boot
Windows 95 does not require a Config.sys or Autoexec.bat file. These files are necessary only for backward compatibility. If you do not need these files, rename them and restart your computer. For example, rename the Autoexec.bat file to Autoexec.bak, and rename the Config.sys file to Config.bak.
If the Config.sys and Autoexec.bat files are required, perform a clean boot of the real-mode configuration with the required drivers. To do so, follow these steps:
- Restart your computer. When you see the 'Starting Windows 95' message, press the F8 key, and then choose Step-By-Step Confirmation from the Startup menu.
- Load the following items when prompted:
If the clean boot of your real-mode configuration eliminates the issue, isolate the conflict with a TSR or real-mode device driver using the step- by-step confirmation function.
WINDOWS 95 COMMAND-LINE SWITCHES
Starting Windows 95 with command line switches is an effective method for isolating issues with your configuration. The switches should be used for troubleshooting only; use the information to modify your existing configuration and eliminate the conflict.
- Follow the instructions for a clean real-mode boot in the 'Clean Real- Mode Boot' section above, but do not load the Windows GUI.
- Start Windows 95 using the troubleshooting command-line switches by typing the following line:
Description of Command-Line Switches
/D - Used for troubleshooting when Windows 95 does not start correctly.
NOTE: Each of the System.ini file entries referenced above belongs in the [386Enh] section of the System.ini file.
WINDOWS CONFIGURATION FILES AND PROGRAMS STARTED AUTOMATICALLY
Windows 95 includes several methods for loading programs automatically. Starting in Safe mode prevents any programs from being started automatically.
Windows 95 includes a Win.ini and System.ini file for backward compatibility with legacy programs and device drivers. Upgrading a previous installation of Windows 3.x to Windows 95, as well as adding software, can lead to conflicts within the Windows configuration files.
Determine If Issue Is Related to Program Starting at Startup
Load Windows 95 by booting to a command prompt and starting Windows 95 by typing 'win' (without quotation marks), holding down the SHIFT key for the duration of the boot. This prevents any programs from loading automatically at startup.
If the issue is resolved by preventing programs from loading at startup, investigate the following possible sources:
The Winstart.bat File
The Winstart.bat file is used to load TSRs that are required for Windows- based programs and are not needed in MS-DOS sessions.
For more information concerning the Winstart.bat file, see the following article in the Microsoft Knowledge Base:
The Win.ini File
The 'load=' and 'run=' lines in the [Windows] section of the file can start programs automatically. See the following section for more information.
The Startup Group
If the issue is resolved by bypassing the Startup group, remove each of the programs from the Startup group individually to isolate the problem program. Ford fsd 425 manual.
The Run Key in the Registry
WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall Windows 95. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
NOTE: For information about how to edit the registry, view the Changing Keys And Values online Help topic in Registry Editor (Regedit.exe). Note that you should make a backup copy of the registry files (System.dat and User.dat) before you edit the registry.
You can prevent programs from loading by removing the program's string from the following registry key:
Programs may also being loading from the following registry key: Roblox lumber tycoon hack (the cheat for mac.
Test Windows Configuration Files
To test the Windows configuration files, follow these steps:
- Boot to a command prompt.
- Rename the Win.ini file by typing the following line: Start Windows 95 by typing 'win' (without quotation marks). If this procedure corrects the problem, ensure that the 'load=' and 'run=' lines in the [Windows] section of the Win.ini file are either blank or preceded with a semicolon (;) to prevent the items from loading.
- Rename the System.ini file by typing the following line:
- Windows 95 requires a System.ini file to load the graphical user interface (GUI). Replace the original file by typing the following line: NOTE: Starting Windows 95 with the System.cb file does not load a driver for the mouse. Edit the new System.ini file, adding the following lines:Start Windows 95 by typing 'win' (without quotation marks) at the command prompt. If replacing the original System.ini file with the System.cb file corrects the issue, the problem most likely resides with either the [boot] or [386Enh] sections of the original System.ini. Restore the original file to troubleshoot it.To isolate the cause of the problem, place a semicolon (;) at the beginning of a line to prevent the item from loading.
For more information about the System.ini file and its default entries, see the following article in the Microsoft Knowledge Base:
PROTECTED-MODE DEVICE DRIVERS
Safe mode disables all protected-mode device drivers for Windows 95. Testing for incompatible components and resource conflicts can be conducted by disabling the protected-mode device drivers in Device Manager.
Removing Protected-Mode Device Drivers to Isolate Conflicts
- In Control Panel, double-click System.
- Click the Device Manager tab, and click the View Devices By Type option.
- Disable each of the protected-mode device drivers. For example: a. Double-click the Floppy Disk Controllers branch to expand it.b. Click Standard Floppy Disk Controller, and then click Properties.c. On the General tab, click the Original Configuration (Current)d. Repeat steps A-C for each device in Device Manager.
- Click Close, and then restart the computer.
If the issue is resolved by disabling the protected-mode drivers in Device Manager, you may have a hardware conflict or a driver may be incompatible with your hardware. For more information about troubleshooting resource conflicts in Windows 95, see the following article in the Microsoft Knowledge Base:
If you determine that a Windows 95 protected-mode device driver is incompatible with your hardware, contact the hardware vendor to determine the availability of new drivers.
CHANGING THE VIDEO DRIVER TO STANDARD VGA DISPLAY DRIVER
NOTE: If you followed the directions in the previous section ('Removing Protected-Mode Drivers to Isolate Conflicts'), you changed the display driver to VGA, and you can skip to the next section. Disabling the display adapter sets your video to the VGA driver.
Safe mode starts Windows 95 with the VGA display driver. To determine if the issue you are experiencing is related to your video driver, change to the VGA driver for testing purposes.
NOTE: To ensure a safe return to your previous configuration:
- Back up the System.ini file.
- Note the current desktop area (resolution) and color palette.
- Record the name of your current video adapter.
To change to the VGA display driver, follow these steps:
- Start Windows 95 in Safe mode.
- In Control Panel, double-click Display.
- On the Settings tab, click Change Display Type.
- In the Adapter Type area, click Change.
- Click the Show All Devices option.
- In the Manufacturers box, click (Standard Display Types). In the Models box, click Standard Display Adapter (VGA), and then click OK.
- Click OK or Close until you return to Control Panel. When you are prompted to restart your computer, do so.
If you determine that your video driver is incompatible with Windows 95, contact the hardware vendor to determine the availability of new drivers.
REGISTRY DAMAGE
When you start Windows 95 in Safe mode the registry is read minimally. Damage to the registry may not be evident when running in Safe mode; it may be necessary to replace the existing registry (System.dat) with a backup to determine if the issue is caused by a damaged registry. To troubleshoot a damaged registry, follow these steps:
- Boot to a command prompt.
- Type the following line to remove the file attributes from the backup of the registry:
- Remove the file attributes from the current registry by typing:
- Rename the registry by typing:
- Copy the backup file to the current registry by typing:
- Restart your computer. NOTE: The System.1st file is a backup of the registry created during the final stage of Windows 95 Setup. Therefore, the 'Running Windows 95 for the first time' banner is displayed and Windows 95 finalizes settings as if it were being installed.
If replacing the System.dat file with the System.1st file resolves the issue, the problem may be related to registry damage. Programs and device drivers added after Windows 95 was installed may require reinstallation to update the new registry.
If the issue is not resolved, restore the original registry. To do so, follow these steps:
- Restart the computer to a command prompt.
- Type the following lines:
- Restart the computer.
The Windows 95 CD-ROM includes tools for backing up your system files as well as the registry. For more information about these tools, see the following articles in the Microsoft Knowledge Base:
IF THE PROBLEM PERSISTS
If the troubleshooting steps outlined in this article do not resolve the issue, the issue may be related to one or more of the following items:
- Faulty hardware
- The computer requires a special machine switch for HIMEM.SYS
- CMOS settings may need to be changed (such as disabling shadow RAM)
- The system ROM BIOS may require an upgrade to be compatible with Windows 95
- A virus
- An unsuccessful upgrade of a previous Windows installation
To determine if Windows 95 is compatible with your current system configuration it may be necessary to install Windows 95 to a clean directory.
If you have enough free disk space, install Windows 95 to an empty folder (such as a Win95 folder). For information about how to do so, see the following article in the Microsoft Knowledge Base:
If this resolves the issue, your previous installation may have included components incompatible with Windows 95.
[ Working with a Drive Overlay | Trouble Shooting / Q&A | xcopy32 Switches | Disclaimer ]
In my profession, I have stumbled across the need to xcopy a Windows 95 drive onto another hard drive, but Windows 95 has too many hidden files to do this. I called Microsoft's Technical Support to find out the trick, and the person I talked to said that there was no way to xcopy a Windows 95 drive, all you could do is re-install it on the new drive. This has been proven to be an untrue statement by the fine folks at Microsoft, so here's how to xcopy a Windows 95 drive:
- Make sure you have a Windows 95 boot disk with the following files:
- MSDOS.SYS (hidden file)
- IO.SYS (hidden file)
- COMMAND.COM
- FORMAT.COM
- FDISK.EXE
- SYS.COM
- Install the new hard drive as a single drive first.
- Boot off the Windows 95 boot disk.
- Type 'fdisk' and set up the new hard drive.
- Reboot off the same Windows 95 boot disk.
- Type 'format c:' (but do not include the '/s' command).
- Reboot one more time off the same Windows 95 boot disk.
- Make sure you can access 'C:' and there are no files shown.
- Set up your new hard drive as a slave to your old hard drive.
- Boot Windows 95 like you always would.
- Make sure there is a 'D:' present.
- Go to Control Panel and double-click on System.
- Go to Performance and click on Virtual Memory.
- Disable Virtual Memory (with 8MB or less of RAM, you'll have to skip this step)
- Close Control Panel and reboot the computer.
- When you see 'Starting Windows 95..' hit F8.
- Choose Safe Mode.
- Once you are running in Safe Mode, click on Start and go to Run.
- Type 'xcopy32 c:*.* d: /h /e /c /k /y'
- When the xcopy is finished, click Start and go to Run again.
- Type 'sys d:'
- Shut down the computer.
- Make the slave drive a single drive again.
- Boot off the same old Windows 95 boot disk.
- Type 'sys c:'
- Remove the disk and attempt to boot off the hard drive.
Assuming everything worked correctly, the hard drive should boot perfectly. If you wish to keep your old hard drive, you may want to set the single drive to a master, and set your old hard drive as the slave.
Working with a Drive Overlay
If you have to use a drive overlay to access the new hard drive (i.e.- your BIOS doesn't support larger than 540MB), then you may have to take a different route.
Windows Gui Programming
- Install the new hard drive as a single drive first.
- Boot off the Windows 95 boot disk.
- Run the setup utility on the Drive Overlay program disk.
- Remove the disk and boot off the hard drive.
- Install Windows 95, and choose Compact Installation.
- After Windows 95 is set up and works, shut down the computer.
- Set the new hard drive as the master drive.
- Set the old hard drive as the slave drive.
- Boot the computer and when you see 'Starting Windows 95..' hit F8.
- Choose Safe Mode.
- Once you are running in Safe Mode, Click on Start & go to Run.
- Type 'xcopy32 d:*.* c: /h /e /c /k /y'
- When the xcopy is finished, reboot the computer.
- When you see 'Starting Windows 95..' hit F8.
- Choose 'Command Prompt Only'
- Type these steps religiously.
- c:
- cd windows
- attrib -h -s -r user.da?
- attrib -h -s -r system.da?
- del *.da?
- d:
- cd windows
- attrib -h -s -r user.da?
- attrib -h -s -r system.da?
- copy *.da? c:windows
- c:
- attrib +h +s +r user.da?
- attrib +h +s +r system.da?
- Reboot the computer.
All that did was copy the registry which the xcopy didn't copy since the files where in use at the time of the xcopy. The registry consists of the following files.
- user.dat (hidden, system, and read-only file)
- system.dat (hidden, system, and read-only file)
- user.da0 (backup - hidden, system, and read-only file)
- system.da0 (backup - hidden, system, and read-only file)
- ????????.dat (misc. other registry files are are usually hidden system, or read-only files)
Be sure to check that everything seemed to xcopy fine and then shut down and remove the slave drive and set the master to single and try again. If everything works, great! If not, I'm sorry, it has worked for me.
Trouble Shooting / Q&A
From time to time things don't go quite as well as you planned. For this reason, I have decided to keep track of the most common problems that people may encounter. This way, if you encounter the same problem, you'll know how to handle it.
- After I think I have everything set up right, I try to boot off the new hard drive and I get: 'Press Any Key To Reboot..'
- Boot off a Windows 95 boot disk and run 'fdisk' to make sure that the partition you created is set Active. Choose 'Display Partition Information' (usually option 4) and look at the partition called 'C: 1' to make sure there is an 'A' under where it says, 'Status'. If you do not see an 'A' hit 'Esc' and choose 'Set Active Partition' (Usually option 2) to set the partition, 'C: 1', active. Reboot and everything should work fine.
- I don't have all the switches available to me that you show. Do I have an old version of xcopy?
- As long as you are running a version of Windows 95, your xcopy will work. Be sure that you have Windows 95 loaded when you use xcopy32, and all the switches will be available (see below). Using xcopy from DOS (meaning that the GUI is not loaded at all) will only allow you to use the switches that xcopy from DOS v6.22 and earlier had available.
- What's the difference between xcopy and xcopy32?
- This is quite simple. xcopy is pretty much the same xcopy that has been in DOS since v5.0. xcopy32 is the new xcopy designed for Windows 95. Now, however, the part that confuses most people is that you can run xcopy32 in DOS and xcopy in Windows 95. Both copies check to see if the GUI is loaded, and then run the appropriate version. I think this was an intelligent programming idea, but as I said, it does seem to confuse a lot of people. So even though you can run xcopy32 from DOS, you have to have the GUI loaded to have all the switches available.
- This is not really a question, but more of a tip for one of our readers.
- If you are looking for a simple way to backup your system files, then be sure to check out this idea from Bill Wolcott.
Boot Windows 95 In Guide
xcopy32 Switches
No Gui Boot
If you're wanting to know ALL the xcopy32 switches, here they are:
Disclaimer
Nothing has arose yet that would cause me to need a disclaimer, but just incase..
I, Andy Couch, can not be held responsible for any human error. The procedures here can cause undesirable circumstances if not followed properly. These procedures have worked flawlessly for myself many times, and I have received many responses from other people across the globe that have also had flawless successes. Therefore, these procedures are proven to be accurate as long as they are followed properly. If any undesirable circumstances occur while following these procedures properly, then most likely, the hardware was faulty to begin with, and I do apologize for the loss.
Boot Windows 95 In Guitar
Microsoft, Windows 95 and the Microsoft Windows 95 Start Button image, all copyright © Microsoft Corporation.